Maleic Anhydride Plant

Phoenix Equipment is liquidating the following equipment from a 20,000 TPY Maleic Anhydride Plant in Pennsylvania: (2) 30,000 Gallon Butane or Propane Bullet Tanks - 250 Psi; (1) 150" Diameter Komarek Greaves Briquetter System; 25,540 SCFM Allis Chambers Compressor; 5' Diameter x 7' Goslin Birmingham Chrome Plated Drum Flaker; and dozens of exchangers and stainless tanks. If you are any questions, contact Jesse Spector at 877-736-9320.

6,500 GAL Buffalo Tank Stainless Steel Tank

Used 6,500 Gal vertical 304-SS stainless steel storage tank. 9' dia. x 14' Straight side. (OAH: Approx 16'4") Slight dished top, Flat bottom. Top fittings: Manway, (3) 4", (2) 2". Built by ...

5' Dia x 7' Goslin Birmingham Drum Flaker

Used 5' diameter x 7' Goslin Birmingham Chrome Plated Drum Flaker. Serial #1267-68-1. 10 HP ex-proof varidrive w/ 3 to 1 speed variation. 125 RPM Max. Available with unused spare drum. Built ...

48" x 20'6" 316L SS Central Fabricators Packed Scrubber System

Used 48" diameter x 20'6" OAH 316L stainless steel Central Fabricators, Inc. Packed Scrubber system, built 2000. 1873 Gal Full Capacity. Design conditions: -15" WC @ 100 Deg F. Includes tank and 20 ...

12,500 GAL Nooter Stainless Steel Tank

Used 12,500 Galon vertical 304 Stainless Steel (SA-240) storage Tank. Design Press: ATMOS @ 250 F. 12' 2.5" Dia x 14' 6" High. Flat bottom, slightly conical top. Manufacturer: NOOTER CORP. ...

Surplus and Used York Chillers

York Chillers

YORK Chiller Products include: centrifugal chillers powered by electricity, steam or natural gas; air-cooled and water-cooled screw chillers; absorption chillers powered by steam, hot water, or natural gas; and scroll chillers.

• HVAC Chillers - (107 companies)

  Heating, ventilation and air conditioning (HVAC) chillers are refrigeration systems that provide cooling for industrial and commercial applications. They use water, oils or other fluids as refrigerants. Search by Specification | Learn More
• 
  Thermoelectric Coolers - (42 companies)

  ...thin ceramic wafers with a series of P and N doped bismuth-telluride semiconductor material placed between them. Ceramic material on both sides of the substrate adds rigidity and electrical insulation. Thermoelectric chillers consist of a series... Learn More
• No Image Available
  General Contracting Services - (3461 companies)

  ...contracting services perform mechanical, electrical, and plumbing services. Mechanical contracting services install, maintain, and repair heating, ventilation and air conditioning (HVAC) equipment and controls. They also install industrial-grade chillers... Learn More
• 
  Mold Making Services - (1498 companies)

  Mold making services design and build tooling and patterns for a variety of molding processes, including investment casting, permanent mold casting, sand casting, die casting, lost foam casting, powder metal, die forging, injection molding, blow molding, extrusion, thermoforming, compression molding, rotational molding and others. Search by Specification | Learn More
• Industrial Cooling Systems and Equipment - (2049 companies)

  Industrial cooling systems and industrial cooling equipment includes air-to-air, liquid-to-air, and liquid-to-liquid heat exchangers; ducts and/or pipes; and other devices for removing heat from a system that contains a heat source. Learn More

APV 6 Sq Ft Scraped Surface Heat Exchangers

• Stock# 4270
• Capacity 6 Sq Ft

Equipment Description

Used 6 sq.ft APV Scraped Surface Heat Exchanger 6" dia x 48" long, driven by 10 Hp, 3/60/208-230-460 volt, 1720 RPM, Drip Proof Motor, in self contained cabinet.

Safety is #1 at Phoenix!

Safety….. In order to have a safe and successful remediation and demolition project a working knowledge of both construction and the law is required. Trained professionals are required to identify, remove, and dispose of any and all hazardous, toxic, or regulated materials. Here at Phoenix, our staff have all completed 40 hour OSHA training as well as a variety of other safety courses. Daily site meetings and tool box meetings are a way of reinforcing our safety consciousness. We have our own safety program that all of our staff is required to learn and practice. And the results speak for themselves…we have had an EMR rating of under one (-1) for over fifteen years. Please contact us for pre-qualification information.

Kinney 300 CFM Vacuum Pumps

• Stock# 3114
• Capacity 300 CFM

Equipment Description

Used Kinney Model KT-300-A/B High Vacuum Pump Kinney Model KT-300 A/B Single stage triplex design high vacuum pump, rated 300 CFM @ 10 microns, "V" belt driven by 15 Hp. 3/60/230-460 volt motor. (Unit has been cleaned painted & tested.)

• Manufacturer Kinney

Need Help? Call Today!

877-736-9320

Other Views - click image for larger view

300 GAL Pfaudler Glass Lined Tank

• Stock# 20381
• Capacity 300 GAL

Equipment Description

300 gallon Pfaudler #5015 glass lined vacuum receiver. Model VR42-300-25. 42" diameter x 54" deep. Clamped top. Internal rated 25/FV @ 450 degrees F. NB# 44227. Mounted on legs. Fittings top: (1) 3" and (2) 2". 2" center bottom drain.

• Manufacturer Pfaudler

Need Help? Call Today!

877-736-9320

Futura Titanium Corp. 11 Sq. Ft. Shell & Tube- High Alloy Heat Exchangers

• Stock# 2539
• Capacity 11 Sq. Ft.

Equipment Description

Used 11 Sq. Ft. Futura Titanium Corp. Horizontal Shell & Tube Exchanger. Titanium (Gr. 2) Tubes: 100PSI @ 200 deg F; Carbon Steel Shell: 75 PSI @ 175 deg F. Serial #5079. NB# 123. Built 1978. (8) Tubes, .75" x 7' Length. Shell dia. 4.5", 100" OAL. Shell -1 pass, Tube - 1 pass. Nozzles: Shell side: (2) 2"; (1) .75". Tube side: (2) 2".

• Manufacturer Futura Titanium Corp.

Need Help? Call Today!

877-736-9320

Contact Us

Niro Fluid Bed Dryers

• Stock# 4152
• Capacity Unknown

Equipment Description

USED LABORATORY FLUID BED DRYER BY NIRO-AEROMATIC, MODEL MP-1, SERIAL # 929037. FEATURES ALL STAINLESS STEEL CABINET ENCLOSURE WITH POLISHED FINISH, 9 KWH HEATING CAPACITY.

• Manufacturer Niro

Need Help? Call Today!

877-736-9320